Litumin Battery Pack Automatic Production Line

Edobo Solar presents its Lithium Battery Pack Automatic Production Line, designed for the automated assembly of lithium battery packs with high precision and efficiency. This production line is ideal for manufacturers looking to streamline production, increase output, energy storage, and consumer electronics.

Key Features:

• Fully Automated Assembly: Automation covers the entire process, including cell sorting, welding, module assembly, and final testing, minimizing human intervention and increasing productivity.
• Advanced Welding Technology: Incorporates laser and ultrasonic welding for high-precision connections, ensuring the durability and performance of battery packs.
• High Capacity: Designed for large-scale production, capable of producing a high volume of battery packs daily, with scalability for expanding production needs
• Integrated Quality Control: Real-time quality monitoring, including automatic testing and diagnostic systems, ensures that each battery pack meets industry standards for safety and performance.

Requirements for basic conditions of equipment installation plant
1. Ground weighing load ≥ 0.75T/m2; Pay attention to the column structure inside the shelter;
2. Power requirements: three-phase 380V ± 10%, 50HZ;
3. Gas source pressure: compressed air 0.4-0.7MPa, nitrogen 0.1-0.3MPa;
4. Environmental temperature: 15-35 ºC, relative humidity 40% -85% R.H
5. There is no severe vibration source, no severe dust, and no corrosive or explosive gases in the surrounding environment.
6. Floor height limit: greater than or equal to 3500mm.
7. Equipment entry requirements: The equipment must meet the dimensions of 2400mm in length, 1750mm in width, and 2150mm in height (with a reserved space of at least 100mm in all directions).
 

1.The warranty period for the entire equipment is 1 year, starting from the date of equipment installation.
2.During the warranty period, if there is a problem with the purchased equipment, Party B shall arrange for a technical engineer to respond within 24 hours after receiving the repair call or arrive at the user's site within 48 hours for handling. The equipment failure caused by non-human abnormal operation shall be repaired free of charge by Party B, and all expenses incurred thereby shall be borne by Party B (including material costs, transportation costs, etc.).
3.Beyond the warranty period, we will provide software upgrade and improvement services as well as technical support in the later stage, and offer the most favorable price.